12v 9 Amp Deep Cycle Gel Battery Rechargeable For Bike Generator
Contact Person : Stephanie
Phone Number : +8618602927482
WhatsApp : +8618602927482
|Minimum Order Quantity :||10 pcs||Price :||Negotiable|
|Packaging Details :||According to customer's requirement||Delivery Time :||15-20 working days|
|Payment Terms :||T/T, Western Union, L/C||Supply Ability :||10000 pcs per week|
|Place of Origin:||China||Brand Name:||Licloud|
|Battery Type:||Deep Cycle Gel Battery||Battery Voltage:||2V|
|Battery Rated Capacity:||300Ah||Dimensions:||172*151*365mm|
|Weight:||18kg||Battery Cover And Exhaust Tether Structure:||Valve Regulated Sealed Battery|
|Output Type:||Terminal Output||Application:||Energy Storage/solar System|
|Charge State:||Maintenance Free Battery||Warranty:||3 Years|
300Ah Maintenance free battery,
JGFM Maintenance free battery,
2v 300ah battery
2V 300Ah Deep Cycle Gel Battery Energy Storage High Performance
JGFM series Deep Cycle Gel Battery uses the latest technology for data centers and UPS systems. With multi-corrosion resistant alloys, special grid design, proprietary additives, unique plate ratio design, low density electrolyte and combined labyrinth pole sealing technology, JGFM series Deep Cycle Gel Battery is dedicated to provide stable, reliable and reliable lead-acid batteries for data room UPS systems, communication systems, power systems, etc.
|Model||Nominal Voltage||Capacity C10||Weight||Dimension|
Use of Deep Cycle Gel Battery
Discharge: 1) 12V battery charging and discharging, 250Ah battery with a current of no more than 25A for 10 hours to discharge until the battery termination voltage of 10.8V or more, do not over discharge.
2) During the discharge process, measure and record the battery voltage, discharge current and ambient temperature every hour, pay attention to the change of ammeter and battery voltage at any time, when the voltage drops to about 12.0V, change to half an hour test. When the measured voltage is 10.8v, stop discharging, open the discharge switch, the discharge is over. And record the discharge termination time, battery voltage, ambient temperature.
3) After discharge, the battery should be recharged in time, to prevent acidification of the poles, the discharge-charging interval should not exceed 8 hours, so it must be balanced within 8 hours to replenish the electricity, the average charging voltage is set to 14.1V (the average of the measured value of the positive and negative terminals of the battery at 25℃), and the maximum charging current is set to 0.25C10A. The battery will run normally with the float charging voltage of 13.5V. Battery 13.5V.4) After discharge, check the discharge capacity at 25℃, it should be not less than 85% of the rated capacity, i.e. 12V250AH battery is not less than 212.5Ah.
Temperature compensation: The above current and voltage setting values are the standard values when the ambient temperature is 25℃, if the gel battery working temperature is beyond the range of 20℃-30℃, the floating charge and average charge voltage should be corrected accordingly, the corrected voltage is, that is, for every 1℃ increase in temperature, the floating charge voltage is reduced by 5.5mV, and for every 1℃ decrease in temperature, the floating charge voltage is increased by 5.5mV.