11.8kg Deep Cycle Gel Battery Valve Regulated Sealed 38Ah

Product Description

12V 38Ah Deep Cycle Gel Battery Energy Storage High Performance

Description

Deep Cycle Gel Battery is a kind of lead-acid battery. Deep Cycle Gel Battery is an improvement of the ordinary lead-acid battery with liquid electrolyte, replacing the sulfuric acid electrolyte with gel electrolyte, which improves the safety, storage capacity, discharge performance and service life compared with the ordinary battery.

Product Features

• Product name: Deep Cycle Gel Battery
• Capacity range: 7Ah-250Ah
• Voltage class: 12V
• Float charge voltage: 13.5V-13.8V
• Equalized charge voltage: 14.4V-14.7V
• Long working life: 10years
• Low self-discharge rate: ≤3%/month
• High sealed reaction efficiency: ≥99%
• Widen operation temperature rang: -30℃~55℃
• Specialized plate grid structure, smaller plate face spacing design, good high power discharge performance, excellent charge acceptance ability
• Multi-alloy plate grid, tight assembly design, high temperature and high humidity curing process of electrode plate, long battery life

Advantages

• Product name: Deep Cycle Gel Battery
• Specially designed for high current and high power application scenarios, with higher energy density than ordinary batteries
• Product design life of 10 years
• Easy maintenance, low TCO cost

Application

• Large Data Center
• Network Operation Center
• Network Base Stations
• Industrial process control equipment
• Banking and financial markets

Compliant standards

• IEC60896-2-1995
• TD/T 799-2010
• GB/T 19638.2－2005
• GB/T22473-2008
• YD/T1360-2005
• JISC8704-2:1999
• Passed ISO9001.ISO14001, GB/T28001-2001, CE,
• TLC, CGC certificate

Use of Deep Cycle Gel Battery

• Product name: Deep Cycle Gel Battery
• Check before charging and discharging: Before charging and discharging, the insulation of the charging equipment should be checked to see if it is good. Specific method: use 500V megohmmeter to measure the DC charging screen bus not less than 10MΩ.
• Initial replenishment of electricity: Before putting the battery into use after installation and inspection, it should be balanced and supplemented with 14.1V balanced charging voltage at 25℃ for a single battery, and charged in a constant voltage current-limiting way for the battery pack. The maximum charging current is set to 0.25C10A.